alt="{AELAB}{Vacuum Seed Counter & Placing apparatus}-{SZC-50}"
AELAB Vacuum Seed Counter & Placing apparatus SZC-50
Vacuum seed Counter is specially used for seed germination test in the process of several species, seed suction, seed placement. It mainly consists of three parts: workbench, extension pipette and suction head.
SZC-50
1
Quantity:
Vacuum Seed Counter & Placing apparatus SZC-50
Introduction
Vacuum seed Counter is specially used for seed germination test in the process of several species, seed suction, seed placement. It mainly consists of three parts: workbench, extension pipette and suction head.

Characteristics
+Adopt High-speed vacuum axial flow fan, with strong suction, and low noise.
+Built-in dirt isolation bag of the fuselage can easily remove the debris and moisture sucked into the fuselage.
+Extension pipette is connected to the plug-in handle at one end and has a vent through hole, which causes the seeds to fall down quickly and smoothly.
+Set the bottom of the bed table with pulleys and move flexibly.
+Equipped with a key control switch and 5 suction heads, which are of the same size and specification as the domestic common germination box.To meet the needs of different seed germination tests.

Technical parameter
Sucker configuration: 5 pieces (1 large, 3 small, 1 round)
Motor power: 1440W
Working power supply: 220V 50Hz
Power regulation range: 300W-1400W
The aperture of 100 holes: 6mm/3mm/1.5mm/0.7mm
 
SortSucked SeedSucked amountFigureIncubationutensil
ACorn/bean/Cotton seed/big25RectanglePL18PH18
Brice/wheat/barley/sorghum100RectanglePL18PH18
Crice/wheat/barley/sorghum100SquarePL12PH12
DRape seed and middle or small100SquarePL12PH12
Esmall granule vegetable seed100roundnessφ9mm glass utensil
#placing
#seed counter
#vacuum counter
#boom placing